| Zigbee and IEEE 802.15.4 |
Zigbee and IEEE 802.15.4
- for remote data, sensor and control applications
Zigbee is a wireless networking standard that is aimed at remote control and
sensor applications which is suitable for operation in harsh radio environments
and in isolated locations. It builds on IEEE standard 802.15.4 which defines the
physical and MAC layers. Above this, Zigbee defines the application and security
layer specifications enabling interoperability between products from different
manufacturers. In this way Zigbee is a superset of the 802.15.4 specification.
With the applications for remote wireless sensing and control growing rapidly
it is estimated that the market size could reach hundreds of millions of dollars
as early as 2007. This makes Zigbee a very attractive proposition, and one which
warrants the introduction of a focussed standard.
Zigbee organisation
The Zigbee standard is organised under the auspices of the Zigbee Alliance. This
organisation has over seventy members, of which five have taken on the status of
what they term "promoter." These five companies are Ember, Honeywell, Invensys,
Mitsubishi, Motorola, Philips, and Samsung. Under the umbrella of the Zigbee
Alliance, the new standard will be pushed forward, taking on board the
requirements of the users, manufacturers and the system developers.
Basics
The distances that can be achieved transmitting from one station to the next
extend up to about 70 metres, although very much greater distances may be
reached by relaying data from one node to the next in a network.
The main applications for 802.15.4 are aimed at control and monitoring
applications where relatively low levels of data throughput are needed, and with
the possibility of remote, battery powered sensors, low power consumption is a
key requirement. Sensors, lighting controls, security and many more applications
are all candidates for the new technology.
Physical and MAC layers
The system is specified to operate in one of the three license free bands at 2.4
GHz, 915 MHz for North America and 868 MHz for Europe. In this way the standard
is able to operate around the globe, although the exact specifications for each
of the bands are slightly different. At 2.4 GHz there are a total of sixteen
different channels available, and the maximum data rate is 250 kbps. For 915 MHz
there are ten channels and the standard supports a maximum data rate of 40 kbps,
while at 868 MHz there is only one channel and this can support data transfer at
up to 20 kbps.
The modulation techniques also vary according to the band in use. Direct
sequence spread spectrum (DSSS) is used in all cases. However for the 868 and
915 MHz bands the actual form of modulation is binary phase shift keying. For
the 2.4 GHz band, offset quadrature phase shift keying (O-QPSK) is employed.
In view of the fact that systems may operate in heavily congested
environments, and in areas where levels of extraneous interference is high, the
802.15.4 specification has incorporated a variety of features to ensure
exceedingly reliable operation. These include a quality assessment, receiver
energy detection and clear channel assessment. CSMA (Carrier Sense Multiple
Access) techniques are used to determine when to transmit, and in this way
unnecessary clashes are avoided.
Data transfer
The data is transferred in packets. These have a maximum size of 128 bytes,
allowing for a maximum payload of 104 bytes. Although this may appear low when
compared to other systems, the applications in which 802.15.4 and Zigbee are
likely to be used should not require very high data rates.
The standard supports 64 bit IEEE addresses as well as 16 bit short
addresses. The 64 bit addresses uniquely identify every device in the same way
that devices have a unique IP address. Once a network is set up, the short
addresses can be used and this enables over 65000 nodes to be supported.
It also has an optional superframe structure with a method for time
synchronisation. In addition to this it is recognised that some messages need to
be given a high priority. To achieve this, a guaranteed time slot mechanism has
been incorporated into the specification. This enables these high priority
messages to be sent across the network as swiftly as possible.
Upper layers (Zigbee)
Above the physical and MAC layers defined by 802.15.4, the Zigbee standard
itself defines the upper layers of the system. This includes many aspects
including the messaging, the configurations that can be used, along with
security aspects and the application profile layers.
There are three different network topologies that are supported by Zigbee,
namely the star, mesh and cluster tree or hybrid networks. Each has its own
advantages and can be used to advantage in different situations.
The star network is commonly used, having the advantage of simplicity. As the
name suggests it is formed in a star configuration with outlying nodes
communicating with a central node.
Mesh or peer to peer networks enable high degrees of reliability to be
obtained. They consist of a variety of nodes placed as needed, and nodes within
range being able to communicate with each other to form a mesh. Messages may be
routed across the network using the different stations as relays. There is
usually a choice of routes that can be used and this makes the network very
robust. If interference is present on one section of a network, then another can
be used instead.
Finally there is what is known as a cluster tree network. This is essentially
a combination of star and mesh topologies.
Both 802.15.4 and Zigbee have been optimised to ensure that low power
consumption is a key feature. Although nodes with sensors of control mechanisms
towards the centre of a network are more likely to have mains power, many
towards the extreme may not. The low power design has enabled battery life to be
typically measured in years, enabling the network not to require constant
maintenance.
Summary
Although there is an increasing number of wireless standards that are appearing,
Zigbee has a distinct area upon which it is focussed. It is not inteneded to
compete with standards such as 802.11, Bluetooth and the like. Instead it has
been optimised to ensure that it meets its intended requirements, fulfilling the
needs for remote control and sensing applications.
|
